Terahertz in vivo imaging of human skin: Toward detection of abnormal skin pathologies.

Terahertz (THz) imaging has long held promise for skin cancer detection but has been hampered by the lack of practical technological implementation. In this article, we introduce a technique for discriminating several skin pathologies using a coherent THz confocal system based on a THz quantum cascade laser. High resolution in vivo THz images (with diffraction limited to the order of 100 µm) of several different lesion types were acquired and compared against one another using the amplitude and phase values. Our system successfully separated pathologies using a combination of phase and amplitude information and their respective surface textures. The large scan field (50 × 40 mm) of the system allows macroscopic visualization of several skin lesions in a single frame. Utilizing THz imaging for dermatological assessment of skin lesions offers substantial additional diagnostic value for clinicians. THz images contain information complementary to the information contained in the conventional digital images.

Directed delivery of terahertz frequency radiation from quantum cascade lasers within a dry 3He dilution refrigerator.

We present a scheme for the full integration of terahertz (THz) frequency quantum cascade lasers (QCLs) within a dilution refrigerator in order to provide a directed delivery of THz power into the sample space. We describe a successful operation of a 2.68 THz QCL located on the pulse tube cooler stage of the refrigerator, with its output coupled onto a two-dimensional electron gas (2DEG) located on a milli-kelvin sample stage via hollow metal waveguides and Hysol thermal isolators, achieving a total loss from QCL to the sample of ∼-9 dB. The thermal isolators limit heat leaks to the sample space, with a base temperature of ∼210 mK being achieved. We observe cyclotron resonance (CR) induced in the 2DEG by the QCL and explore the heating impact of the QCL on all stages of the refrigerator. The CR effect induced by the THz QCL is observable at electron temperatures as low as ∼430 mK. The results show a viable route for the exploitation of THz QCLs within the environment of a dilution refrigerator and for the THz power delivery in very low-temperature (<0.5 K) condensed matter experiments.

Field-resolved high-order sub-cycle nonlinearities in a terahertz semiconductor laser.

The exploitation of ultrafast electron dynamics in quantum cascade lasers (QCLs) holds enormous potential for intense, compact mode-locked terahertz (THz) sources, squeezed THz light, frequency mixers, and comb-based metrology systems. Yet the important sub-cycle dynamics have been notoriously difficult to access in operational THz QCLs. Here, we employ high-field THz pulses to perform the first ultrafast two-dimensional spectroscopy of a free-running THz QCL. Strong incoherent and coherent nonlinearities up to eight-wave mixing are detected below and above the laser threshold. These data not only reveal extremely short gain recovery times of 2 ps at the laser threshold, they also reflect the nonlinear polarization dynamics of the QCL laser transition for the first time, where we quantify the corresponding dephasing times between 0.9 and 1.5 ps with increasing bias currents. A density-matrix approach reproducing the emergence of all nonlinearities and their ultrafast evolution, simultaneously, allows us to map the coherently induced trajectory of the Bloch vector. The observed high-order multi-wave mixing nonlinearities benefit from resonant enhancement in the absence of absorption losses and bear potential for a number of future applications, ranging from efficient intracavity frequency conversion, mode proliferation to passive mode locking.

Terahertz magnetoplasmon resonances in coupled cavities formed in a gated two-dimensional electron gas.

We report on both experiments and theory of low-terahertz frequency range (up to 400 GHz) magnetoplasmons in a gated two-dimensional electron gas at low (<4K) temperatures. The evolution of magnetoplasmon resonances was observed as a function of magnetic field at frequencies up to ∼400 GHz. Full-wave 3D simulations of the system predicted the spatial distribution of plasmon modes in the 2D channel, along with their frequency response, allowing us to distinguish those resonances caused by bulk and edge magnetoplasmons in the experiments. Our methodology is anticipated to be applicable to the low temperature (<4K) on-chip terahertz measurements of a wide range of other low-dimensional mesoscopic systems.

Photoconductive arrays on insulating substrates for high-field terahertz generation.

We report on the design, fabrication and characterisation of large-area photoconductive THz array structures, consisting of a thin LT-GaAs active region transferred to an insulating substrate using a wafer-scale bonding process. The electrically insulating, transparent substrate reduces the parasitic currents in the devices, allowing peak THz-fields as high as 120 kV cm-1 to be generated over a bandwidth >5 THz. These results are achieved using lower pulse energies than demanded by conventional photoconductive arrays and other popular methods of generating high-field THz radiation. Two device sizes are fully characterised and the emission properties are compared to generation by optical rectification in ZnTe. The device can be operated in an optically saturated regime in order to suppress laser noise.

Author Correction: Diffraction-limited ultrabroadband terahertz spectroscopy.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Terahertz photonic integrated circuit for frequency tuning and power modulation.

The quantum cascade laser is a powerful solid-state source of terahertz-frequency radiation. However, integrating multiple photonic functions into a monolithic platform in this frequency range is non-trivial due to the scaling of photonic structures for the long terahertz wavelengths and the low frequency tuning coefficients of the quantum cascade lasers. Here, we have designed a simple terahertz-frequency photonic integrated circuit by coupling a racetrack resonator with a ridge laser in the longitudinal direction to design a notch filter. The transmission properties of this filter structure are dependent on the phase matching and losses in the coupled racetrack and results in a comb of stopband frequencies. We have optimized the comb separation by carefully selecting the cavity dimensions of the racetrack resonator to suppress longitudinal modes in the ridge laser enabling single-mode emission. The emission frequencies and output power from laser are controlled through appropriate control of drive currents to the ridge and the racetrack resonator. The emission frequency is electrically tuned over ∼81 GHz exploiting Stark shift of the gain as a function of drive current at the ridge laser, coinciding with an output power variation of ∼27% of the peak power (at a heat sink temperature of 50 K). The output power from the ridge also varied by ∼30% and the frequency was tuned by a further 10 GHz when the driving conditions at the ridge laser are invariant and the current at the racetrack resonator was varied. To our best knowledge, this is the first report of a frequency engineering, tuning and power modulation of terahertz-frequency quantum cascade lasers using a photonic integrated circuit.

Giant optical nonlinearity interferences in quantum structures.

Second-order optical nonlinearities can be greatly enhanced by orders of magnitude in resonantly excited nanostructures. These resonant nonlinearities continually attract attention, particularly in newly discovered materials. However, they are frequently not as heightened as currently predicted, limiting their exploitation in nanostructured nonlinear optics. Here, we present a clear-cut theoretical and experimental demonstration that the second-order nonlinear susceptibility can vary by orders of magnitude as a result of giant destructive, as well as constructive, interference effects in complex systems. Using terahertz quantum cascade lasers as a model source to investigate interband and intersubband nonlinearities, we show that these giant interferences are a result of an unexpected interplay of the second-order nonlinear contributions of multiple light and heavy hole states. As well as of importance to understand and engineer the resonant optical properties of nanostructures, this advanced framework can be used as a novel, sensitive tool to elucidate the band structure properties of complex materials.

Tunable broadband terahertz polarizer using graphene-metal hybrid metasurface.

We demonstrate an electrically tunable polarizer for terahertz (THz) frequency electromagnetic waves formed from a hybrid graphene-metal metasurface. Broadband (>3 THz) polarization-dependent modulation of THz transmission is demonstrated as a function of the graphene conductivity for various wire grid geometries, each tuned by gating using an overlaid ion gel. We show a strong enhancement of modulation (up to ∼17 times) compared to graphene wire grids in the frequency range of 0.2-2.5 THz upon introduction of the metallic elements. Theoretical calculations, considering both plasmonic coupling and Drude absorption, are in good agreement with our experimental findings.

Increasing the sensitivity of terahertz split ring resonator metamaterials for dielectric sensing by localized substrate etching.

We demonstrate a significant enhancement in the sensitivity of split ring resonator terahertz metamaterial dielectric sensors by the introduction of etched trenches into their inductive-capacitive gap area, both through finite element simulations and in experiments performed using terahertz time-domain spectroscopy. The enhanced sensitivity is demonstrated by observation of an increased frequency shift in response to overlaid dielectric material of thicknesses up to 18 µm deposited on to the sensor surface. We show that sensitivity to the dielectric is enhanced by a factor of up to ∼2.7 times by the incorporation of locally etched trenches with a depth of ∼3.4 µm, for example, and discuss the effect of the etching on the electrical properties of the sensors. Our experimental findings are in good agreement with simulations of the sensors obtained using finite element methods.

Detection sensitivity of laser feedback interferometry using a terahertz quantum cascade laser.

We report on the high detection sensitivity of a laser feedback interferometry scheme based on a terahertz frequency quantum cascade laser (QCL). We show that variations on the laser voltage induced by optical feedback to the laser can be resolved with the reinjection of powers as low as ∼-125 dB of the emitted power. Our measurements demonstrate a noise equivalent power of ∼1.4 pW/√Hz, although, after accounting for the reinjection losses, we estimate that this corresponds to only ∼1 fW/√Hz being coupled to the QCL active region.

Gas spectroscopy through multimode self-mixing in a double-metal terahertz quantum cascade laser.

A multimode self-mixing terahertz-frequency gas absorption spectroscopy is demonstrated based on a quantum cascade laser. A double-metal device configuration is used to expand the laser's frequency tuning range, and a precision-micromachined external waveguide module is used to enhance the optical feedback. Methanol spectra are measured using two laser modes at 3.362 and 3.428 THz, simultaneously, with more than eight absorption peaks resolved over a 17 GHz bandwidth, which provide the noise-equivalent absorption sensitivity of 1.20×10-3 cm-1 Hz-1/2 and 2.08×10-3 cm-1 Hz-1/2, respectively. In contrast to all previous self-mixing spectroscopy, our multimode technique expands the sensing bandwidth and duty cycle significantly.

Silver-based surface plasmon waveguide for terahertz quantum cascade lasers.

Terahertz-frequency quantum cascade lasers (THz QCLs) based on ridge waveguides incorporating silver waveguide layers have been investigated theoretically and experimentally, and compared with traditional gold-based devices. The threshold gain associated with silver-, gold- and copper-based devices, and the effects of titanium adhesion layers and top contact layers, in both surface-plasmon and double-metal waveguide geometries, have been analysed. Our simulations show that silver-based waveguides yield lower losses for THz QCLs across all practical operating temperatures and frequencies. Experimentally, QCLs with silver-based surface-plasmon waveguides were found to exhibit higher operating temperatures and higher output powers compared to those with identical but gold-based waveguides. Specifically, for a three-well resonant phonon active region with a scaled oscillator strength of 0.43 and doping density of 6.83 × 1015 cm-3, an increase of 5 K in the maximum operating temperature and 40% increase in the output power were demonstrated. These effects were found to be dependent on the active region design, and greater improvements were observed for QCLs with a larger radiative diagonality. Our results indicate that silver-based waveguide structures could potentially enable THz QCLs to operate at high temperatures.

Multi-phase volcanic resurfacing at Loki Patera on Io.

The Jovian moon Io hosts the most powerful persistently active volcano in the Solar System, Loki Patera. The interior of this volcanic, caldera-like feature is composed of a warm, dark floor covering 21,500 square kilometres surrounding a much cooler central 'island'. The temperature gradient seen across areas of the patera indicates a systematic resurfacing process, which has been seen to occur typically every one to three years since the 1980s. Analysis of past data has indicated that the resurfacing progressed around the patera in an anti-clockwise direction at a rate of one to two kilometres per day, and that it is caused either by episodic eruptions that emplace voluminous lava flows or by a cyclically overturning lava lake contained within the patera. However, spacecraft and telescope observations have been unable to map the emission from the entire patera floor at sufficient spatial resolution to establish the physical processes at play. Here we report temperature and lava cooling age maps of the entire patera floor at a spatial sampling of about two kilometres, derived from ground-based interferometric imaging of thermal emission from Loki Patera obtained on 8 March 2015 ut as the limb of Europa occulted Io. Our results indicate that Loki Patera is resurfaced by a multi-phase process in which two waves propagate and converge around the central island. The different velocities and start times of the waves indicate a non-uniformity in the lava gas content and/or crust bulk density across the patera.

Extraction-controlled terahertz frequency quantum cascade lasers with a diagonal LO-phonon extraction and injection stage.

We report an extraction-controlled terahertz (THz)-frequency quantum cascade laser design in which a diagonal LO-phonon scattering process is used to achieve efficient current injection into the upper laser level of each period and simultaneously extract electrons from the adjacent period. The effects of the diagonality of the radiative transition are investigated, and a design with a scaled oscillator strength of 0.45 is shown experimentally to provide the highest temperature performance. A 3.3 THz device processed into a double-metal waveguide configuration operated up to 123 K in pulsed mode, with a threshold current density of 1.3 kA/cm2 at 10 K. The QCL structures are modeled using an extended density matrix approach, and the large threshold current is attributed to parasitic current paths associated with the upper laser levels. The simplicity of this design makes it an ideal platform to investigate the scattering injection process.

DNA self-assembly-driven positioning of molecular components on nanopatterned surfaces.

We present a method for the specific, spatially targeted attachment of DNA molecules to lithographically patterned gold surfaces-demonstrated by bridging DNA strands across nanogap electrode structures. An alkanethiol self-assembled monolayer was employed as a molecular resist, which could be selectively removed via electrochemical desorption, allowing the binding of thiolated DNA anchoring oligonucleotides to each electrode. After introducing a bridging DNA molecule with single-stranded ends complementary to the electrode-tethered anchoring oligonucleotides, the positioning of the DNA molecule across the electrode gap, driven by self-assembly, occurred autonomously. This demonstrates control of molecule positioning with resolution limited only by the underlying patterned structure, does not require any alignment, is carried out entirely under biologically compatible conditions, and is scalable.

Diffraction-limited ultrabroadband terahertz spectroscopy.

Diffraction is the ultimate limit at which details of objects can be resolved in conventional optical spectroscopy and imaging systems. In the THz spectral range, spectroscopy systems increasingly rely on ultra-broadband radiation (extending over more 5 octaves) making a great challenge to reach resolution limited by diffraction. Here, we propose an original easy-to-implement wavefront manipulation concept to achieve ultrabroadband THz spectroscopy system with diffraction-limited resolution. Applying this concept to a large-area photoconductive emitter, we demonstrate diffraction-limited ultra-broadband spectroscopy system up to 14.5 THz with a dynamic range of 10(3). The strong focusing of ultrabroadband THz radiation provided by our approach is essential for investigating single micrometer-scale objects such as graphene flakes or living cells, and besides for achieving intense ultra-broadband THz electric fields.

Engineered far-fields of metal-metal terahertz quantum cascade lasers with integrated planar horn structures.

The far-field emission profile of terahertz quantum cascade lasers (QCLs) in metal-metal waveguides is controlled in directionality and form through planar horn-type shape structures, whilst conserving a broad spectral response. The structures produce a gradual change in the high modal confinement of the waveguides and permit an improved far-field emission profile and resulting in a four-fold increase in the emitted output power. The two-dimensional far-field patterns are measured at 77 K and are agreement in with 3D modal simulations. The influence of parasitic high-order transverse modes is shown to be controlled by engineering the horn structure (ridge and horn widths), allowing only the fundamental mode to be coupled out.

Label-free electrochemical impedance biosensor to detect human interleukin-8 in serum with sub-pg/ml sensitivity.

Biosensors with high sensitivity and short time-to-result that are capable of detecting biomarkers in body fluids such as serum are an important prerequisite for early diagnostics in modern healthcare provision. Here, we report the development of an electrochemical impedance-based sensor for the detection in serum of human interleukin-8 (IL-8), a pro-angiogenic chemokine implicated in a wide range of inflammatory diseases. The sensor employs a small and robust synthetic non-antibody capture protein based on a cystatin scaffold that displays high affinity for human IL-8 with a KD of 35 ± 10 nM and excellent ligand specificity. The change in the phase of the electrochemical impedance from the serum baseline, ∆θ(ƒ), measured at 0.1 Hz, was used as the measure for quantifying IL-8 concentration in the fluid. Optimal sensor signal was observed after 15 min incubation, and the sensor exhibited a linear response versus logarithm of IL-8 concentration from 900 fg/ml to 900 ng/ml. A detection limit of around 90 fg/ml, which is significantly lower than the basal clinical levels of 5-10 pg/ml, was observed. Our results are significant for the development of point-of-care and early diagnostics where high sensitivity and short time-to-results are essential.

Morbidity associated with anterior iliac crest bone graft harvesting in children undergoing orthopaedic surgery: a prospective review.

PURPOSE: Autologous iliac crest bone grafting is an integral part of many orthopaedic surgical procedures. Several studies have documented morbidity and prolonged pain following iliac crest bone graft harvesting in adults; however, in children there is a paucity of information. The purpose of the present study was to quantify the degree of pain and morbidity associated with anterior iliac crest graft harvesting in children undergoing non-spinal orthopaedic surgery. METHODS: Patients were prospectively enrolled prior to orthopaedic surgery. A patient self-reported visual analogue score was used to record pain at specified time points following surgery. In addition, the patients were reviewed at 2 and 6 weeks, 3 months and 1 year after surgery to record any complications. RESULTS: Data was collected on 33 patients (34 graft sites). Only one patient (2.94 %) had a complication, namely an injury to the lateral femoral cutaneous nerve. This resolved 3 months after surgery. 89 % of patients had no pain at the iliac crest graft harvest site 3 months after surgery. The three patients who had pain at 3 months had visual analogue scores of 1.0, 1.1 and 1.3, respectively. CONCLUSION: This series reveals a very low complication rate and minimal iliac crest graft harvest site pain in children undergoing non-spinal orthopaedic surgery. In addition, the pain experienced is short-lived.